The new Fernox TF1 Omega Filter Flushing Adapter provides a simple and convenient way to attach any powerflushing machine with a standard 3/4” BSP connection to a central heating system via a Fernox TF1 Omega Filter. The adapter replaces the filter body and allows a full flow rate powerflush to be achieved quickly and efficiently.
The Fernox TF1 Omega Filter Flushing Adapter is rated up to 85°C. For systems with a combination boiler, powerflushing via the filter connection has the added benefit of allowing the primary side of the secondary heat exchanger to be cleaned. This can be achieved by turning the hot water tap on to engage the boiler diverter valve.
Connecting a powerflushing machine to the system using the Fernox TF1 Omega Filter Flushing Adapter is simple. The central heating system should be drained and the TF1 Omega Filter body removed. This is replaced with the flushing adapter unit. The powerflushing machine can then be connected to the adapter using the standard fitting.
“The benefit of connecting via the adapter is that it allows for a quick, simple and thorough full flow rate clean,” commented Francine Wickham, Global Marketing Director at Fernox. “Launching the TF1 Omega Filter and subsequently the TF1 Omega Filter Flushing Adapter is part of our ongoing drive to make installers’ work as straightforward and convenient as possible – helping them to achieve the best possible results no matter what the circumstances.”
The nickel-plated, forged brass, Fernox TF1 Omega Filter combines a powerful Neodymium magnet with Hydronic Particle Separation (HPS) technology to extract and retain market-leading levels of magnetic and non-magnetic system debris to ensure optimum system protection.
The new Fernox TF1 Omega Filter Flushing Adapter is available now from plumbers’ merchants. To find out more visit www.fxdevelopment.co.uk/usa-new.